CLICK HERE TO REGISTER 3GSTEPPER Instruction to assemble the stepper and some points to ride the stepper SAFETY POINTS 1) The number one item that I recommend before even to start riding the stepper is a helmet it is the best investment that you will be making take it from Gary Silva a guy that had just about every bone broken in his body but there is nothing like having your brain scramble by concrete a concussion is not laughing matter do not learn from experience you might not be as fortunate. 2) Always obey the laws of the roads 3) I do not recommend to ride the stepper at night but if you make sure that use have proper lighting and you have the reflectors that come with the stepper 4) The stepper is a strictly a recreational bike do not use for any thing more then having a great workout the stepper it is not design for bmx stunts Taking mountain biking and not for any free ride. Proper tools 1) 2.5, 4,5,6 and 8 mm Allen wrench 2) 15 mm open wrench 3) Phillips screwdriver OPEN THE BOX WE HAVE DIFFERENT MODELS THIS  INSTRUCTION APPLY ONLY TO HAMMER,WORK IT AND DIABLO 1) Remove the deck in which they are in two boxes as you open the box 2) Take the parts box out the box 3) Take the stepper out the box, Remove front wheel 4) Remove the protecting packaging out the stepper 5) Open the parts box and lay all the parts in a table were you can see exactly what you have 6) Fellow the instruction on the diagram 7) Install fork first please fellow the diagram instruction 8) Install the front wheel fellow the diagram NOTE: MAKE SURE THAT YOU PLACE THE WHEEL IN THE CENTER USE THE FORK MIDDLE AS A GUIDE 9) Install the pedals please fellow instruction warning the pedal are clearly mark left and right please fellow instructions 10) Before installing the decks to the frame install bracket that come in the part box please fellow the diagram 11) Install the deck to the frame make sure that fellow the instructions on the diagram TIPS HOW TO RIDE THE STEPPER 1) GET USE TO THE BRAKES 2) WHEN PEDALING THE STEPPER OR STEPPING DOWN ON THE STEPPER PLEASE MAKE SURE THAT YOU STEP ALWAYS DOWN DO NOT STEP HALF WAY THAT WILL MAKE THE CHAIN TO FERAIIL OF THE FRONT SPROCKET 3) IF THE CHAIN COME OFF INSTALL THE CHAIN IN THE FRONT 4) REMEMBER THAT YOU NEED TO USE UPPER BODY TO CREATE MORE LEVERAGE ON YOUR STROKE Click to Enlarge

Installation of front wheel NOTE MAKE SURE THAT YOU PLACE THE WHEEL IN THE CENTER USE THE FORK MIDDLE AS A GUIDE Adjusting the Clever bars make sure that you have at least 10 mm of the handle bar sticking out in the bottom and make sure that you double checl That the bolts are tight all four them. The Clever bars design to be adjusted to what ever angle rider wants. Installation of the fork as you have all the parts that come in the part box they are in a plastic bag please lay all the parts in order of the diagram Have the handlebar and stem ready they all ready come mounted Number 1 is an aluminum type you might say washer it is the biggest one in the bag please lay that one first as you see Number 2 is a rubber washer place lay on inside the grove of the washer Number 3 is the aluminum washer they are two of them no difference which one goes first Number 4 is the other aluminum washer Number 5 you install the stem that is mounted with the handlebars make sure that the side bolts of the stem are loose Number 6 you install the a washer as you see in the diagram Number 7 you have a long Allen bolt this is the key point of installation of the fork this bolt is design to take all the play out the fork Be very carefull when tight the allen bolt you have to check to get all the play out the fork do not over tight the top bolt that will cause The number 6 washer to brake. Number 8 is your final task is to make sure that the side bolts number 5 is really tight Next >>